title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100dp1t1b1m2qeh 2:1 7/20/2007 ST121009 b bf 1 1 b 17491 revised and redrawn 7/20/07 bf note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. contact material: silver 5. rating: 5a @ 120 vac or 28 vdc 2a @ 250 vac 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk: t100011 - lock washer (1) t100015 - lock ring (1) t100000 - hex nut (2) pos. 1 pos. 2 pos. 3 switch function none on on 2-3, 5-6 n/a 2-1, 5-4 2 13 circuit: dpdt e-switch marking on opposite side 4 56 3 12.70 [.500 in] 11.43 [.450 in] 6 5 46 (on) = momentary 2.92 [.115 in] n epoxy seal keyway 25 ~ pos. 1 pos. 2 pos. 3 1/4-40 uns - 2a 6.60 [.260 in] 1.27 [.050 in] 4.83 [.190 in] .76 [.030 in] typ. 4.70 [.185 in] typ. 8.89 [.350 in] 4.80 [.189 in] 15.49 [.610 in] 10.41 [.410 in] 8.89 [.350 in] p.c. mounting 4.83 [.190 in] 4.70 [.185 in] n 1.85 [.073 in] 1 2 3 5 6 4
|
